With links to:
- The full second edition of the report
- A summary table
- Tailings world map
- Tailings storage methods
- News release for the second edition of the report
- 2021 letter to the United Nations Environment Programme
The 2019 mine tailings dam collapse near Brumadinho, Brazil, killed over 250 people and destroyed houses and buildings for kilometres before flowing into the Paraopeba River. In 2014, the Mount Polley mine in British Columbia, Canada, spilled over 24 billion litres of mine waste and debris into Quesnel Lake and the Fraser River watershed, home to one of the largest salmon runs in North America. These catastrophes stunned the world, but should not have come as a surprise. Tailings facilities, which contain the processed waste materials generated from mining metals and minerals, are failing with increasing frequency and severity.
The safest tailings facility is the one that is not built. To avoid the long-term liability of mine waste sites and their social and environmental impacts, we must reduce the volume of tailings produced, as well as the overall demand for primary raw minerals. Over the past 40 years, ore grades have declined on average by half for many minerals, effectively doubling the volume of mine waste tailings generated for each unit of mineral produced. Current trends suggest an additional 2- to 10-fold increase in the extraction and uses of most minerals by 2060. These trends are not sustainable. We need to continue to mine at least some minerals, including to support energy transition technologies, but we need best standards and practices to do so.
Tailings facilities can fail in many ways and with varying degrees of severity. This document outlines guidelines aimed at preventing catastrophic failures: failures where the structural integrity of the storage facility has been compromised.
The ultimate goal of tailings management must be zero harm to people and the environment and zero tolerance for human fatalities. Operating companies must commit to and document that they have made safety the primary consideration in tailings facilities and dam design, construction, operation, closure and post-closure. If an operating company identifies any potential loss of life as a result of a tailings dam failure, the dam must be designed to withstand the most extreme credible meteorological and seismic events.
Prior to permitting approval and over the life of the mine, operating companies must ensure the meaningful engagement, participation and consent of affected and potentially affected communities for any tailings facility.
The use of upstream dams must be banned in favour of centreline and downstream dams, which are much less vulnerable to all mechanisms of dam failure. Additionally, dams must not be built in close proximity to communities or above mining infrastructure where workers are likely to be present.
Design, construction, operation and closure at any tailings facility must all be subject to the best available technologies and best available practices. This would encourage the use of filtered tailings, which reduce the probability and consequence of failure.
Operating companies must document detailed understanding of the dam foundation as well as the tailings material properties, with special attention to clay content and liquefaction potential. There must be annual reporting that verifies that dam operations and construction adheres to the documented dam design.
Tailings facilities must be reviewed, inspected, monitored, and maintained until they reach a permanent state where the potential for failure is essentially impossible. The initial storage of filtered tailings facilitates an eventual safe closure.
Worst-case tailings failure scenarios must be modelled and made public prior to permitting and regularly updated throughout facility lifecycles. Emergency and evacuation drills related to catastrophic failure of tailings facilities must be held on an annual basis, and their planning and execution must include participation from affected communities, workers, local authorities and emergency management.
A culture of safety and responsibility must be upheld at the highest level within a corporation; this can only be achieved if the Board of Directors is held accountable for its actions (or lack thereof). The Board of Directors must bear the prime responsibility for the safety of tailings facilities, including the consequences of dam failures, and demonstrate that the company has the necessary financial assurance to cover the full cost of closure and post-closure plans as well as public liability insurance to cover the full cost of any catastrophic failures.
Summary of Guidelines
- Make safety the guiding principle in design, construction, operation, and closure
- Ban new mine tailings facilities immediately upstream from inhabited areas
- Ban upstream dams at new mines and close existing upstream facilities
- Any potential loss of life is an extreme event and design must respond accordingly
- Mandate the use of Best Available Technology for tailings, including the use of filtered tailings, and implement rigorous controls for safety, including after mine closure
- Demonstrate understanding of local conditions and tailings characteristics with robust monitoring systems and develop emergency preparedness/response plans
- Affected communities must provide consent, and safety oversight must be independent, including the establishment of grievance procedures and whistleblower protections
- Information regarding mine safety must be made publicly available
- Corporate boards must assume full responsibility for risk (including financial risk) and accept the consequences of failure
See the summary table of the 17 guidelines here.
In order to understand how and why failures occur, we must understand the scope of the issue. There is currently no global inventory of the thousands of tailings storage facilities, or a complete registry of dam failures. Compiling and sharing this information, publicly and transparently, is essential. An independent international agency, such as a United Nations-endorsed agency, in collaboration with responsible States, operating companies, and civil society, must drive this process, collect information on tailings dams and tailings dam failures worldwide, and share it with affected communities in order to de-risk these sites and support work to put in place proper emergency action plans.
Ultimately, this nascent international agency must be able to oversee tailings management safety worldwide. It must be a well-resourced agency capable of efficiently updating global standards, certifying their implementation, investigating failures and making publicly available recommendations. In order to determine the reach and scope of such an agency, an independent study should investigate which governance model would be most appropriate for this task.
Version 1.0 of the Safety First Guidelines
The first version of the Safety First Guidelines was released in June, 2020. View the original report, a summary table, and a news release with supporting quotes and list of endorsers.